Field Tester N6WG asked if anyone had set up this weekend's Elecraft QSO Party
for TR Log.
Below is a copy of my configuration file, which can be modified to suit.
Because I have a K1, it is aimed at CW only but *may* also work on phone. Be
sure to note the requirement to run together the rig and serial number when
logging, like "579 Bob K212". For some reason, TRLog reverses the name and rig
data in the log, but that should not cause problems.
Last year it was necessary to parse the log in Excel to score field testers,
etc., but this year's scoring is so simple that no additional effort should be
necessary.
73, Paul W8TM
MY CALL = W8TM
MY STATE = OH
contest = general qso
contest name = ELECRAFT QSO PARTY
QSO BY BAND = TRUE
QSO BY MODE = TRUE
; Points based on QRP; adjust for other powers
QSO POINT METHOD = THREE POINTS PER QSO
; For received QTH, type rig and serial number or power.
; No space between received rig and serial number.
EXCHANGE RECEIVED = RST NAME QTH
; Type received RST Name Rig or Power in that order to avoid logging name as
rig.
; TR Log reverses order of name and rig/pwr in editable log, but no problem.
POSSIBLE CALL WINDOW DUPE BACKGROUND = LIGHT CYAN
DISPLAY MODE = COLOR
cq EXCHANGE = ^[ Paul K1 850
s&p exchange = ^@ [ Paul K1 850
REPEAT S&P EXCHANGE = ^] Paul K1 850
QSL MESSAGE = ^TU
CQ MEMORY F1 = ^CQ eqp \ \
CQ MEMORY F2 = ^CQ eqp eqp \ \
CQ MEMORY F3 = ^]
CQ MEMORY F4 = ^Paul
CQ MEMORY F5 = ^K1 850
CQ MEMORY F6 = PWR?
CQ MEMORY ALTF6 = ^PWR?
CQ MEMORY F7 = ^\
CQ MEMORY F8 = ^R
EX MEMORY F3 = ^]
ex memory altf3 = ^rst?
ex memory f4 = ^Paul
ex memory altf4 = ^Name?
ex memory f5 = ^K1 850
EX MEMORY altF5 = ^RIG?
EX MEMORY F6 = PWR?
EX MEMORY ALTF6 = ^PWR?
EX MEMORY F7 = ^\
EX MEMORY F8 = ^R
ex menu = F2-Ex F3-RST F4-Name F5-RigNr F6-Pwr? F7-W8TM F8-R F9-?
cq menu = F2-CQ F3-RST F4-Name F5-RigNr F6-Pwr? F7-W8TM F8-R F9-?
QSO BEFORE MESSAGE = SRI DUPE \
CALLSIGN UPDATE ENABLE = TRUE
KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
ESCAPE EXITS SEARCH AND POUNCE = FALSE
PADDLE PORT = 1
CURTIS KEYER MODE = A
CW TONE = 0
PADDLE MONITOR TONE = 0
CODE SPEED = 26
SHOW SEARCH AND POUNCE = TRUE
HOUR OFFSET = 5
DE ENABLE = FALSE
CONFIRM EDIT CHANGES = FALSE
BAND = 15
VISIBLE DUPESHEET = TRUE
COLUMN DUPESHEET ENABLE = TRUE
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|