Comment below ...
> -----Original Message-----
> From: trlog-admin@contesting.com [mailto:trlog-admin@contesting.com]On
> Behalf Of Frank Davis
> Sent: Sunday, January 12, 2003 10:03 AM
> To: trlog@contesting.com
> Subject: [TRLog] Re: TRLog digest, Vol 1 #265 - 11 msgs
>
>
> In the NAQP.DOM file that I have that came with 6.72A here is
> what it shows:
>
> vO1 = VO1, NF
>
> vO2 = VO2, LAB
>
> This is correct as Labrador territory and Newfoundland island are
> separate mults in NAQP
Frank, here is paragraph 10 from the NAQP rules posted on the NCJ website:
"Multipliers: Are U.S. states (including KH6 and KL7), 13 Canadian
provinces/territories (British Columbia, Alberta, Saskatchewan, Manitoba,
Ontario, Quebec, New Brunswick, Nova Scotia, PEI, Newfoundland/Labrador,
Yukon, NWT and Nunavut) and other North American countries. District of
Columbia counts as Maryland. Non-North American countries, maritime mobiles
and aeronautical mobiles do not count as multipliers, but may be worked for
QSO credit."
For NAQP, Newfoundland and Labrador are a single multiplier. That is why
the naqp.dom file is wrong and should be edited with something like ...
vo = vo, nf, lab
Tim Totten, N4GN, posted an edited naqp.dom file here on the reflector back
in December that had this line replacing the two you listed above. It
worked fine in all my pre-NAQP testing and in the contest itself.
In any case, thanks for all the contacts and mults over the years!!
73,
Ed - W0YK
>
> 73 Frank VO1HP.
>
> Message: 3
> From: K5NZ@aol.com
> Date: Sat, 11 Jan 2003 14:26:20 EST
> To: trlog@contesting.com
> Subject: [TRLog] More on NAQP Problem
>
> I have traced it down to one of these lines in the "new"
> naqp.dom causing the
> problem
>
> vo = vo,nf,lab
>
> md = md,mary,dc
>
> remove these 2 lines and the "new" naqp.dom works fine with tr 672...
>
> nz
>
>
> Message: 4
> From: K5NZ@aol.com
> Date: Sat, 11 Jan 2003 17:32:58 EST
> To: trlog@contesting.com
> Subject: [TRLog] NAQP
>
> Last post on this... Looks like the "new" naqp.dom problem was
> just that the
> line
>
> vo = vo, nf, lab needed to be vo1= vo, nf, lab
>
> With this corrected 672 logs qso's just fine.
>
> I assume the rest of the file has the multipliers correct?
> Such a simple
> thing and what a mess it caused for us who went and downloaded
> the newest
> naqp.dom as we were advised to. These updates should have been
> supplied with
> the TR 672 program updates.
>
> Mike K5NZ
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
>
> --__--__--
>
> Message: 5
> Date: Sat, 11 Jan 2003 15:08:28 -0800
> From: George Fremin III - K5TR <geoiii@kkn.net>
> To: K5NZ@aol.com
> Cc: trlog@contesting.com
> Subject: Re: [TRLog] NAQP
>
> On Sat, Jan 11, 2003 at 05:32:58PM -0500, K5NZ@aol.com wrote:
> > Last post on this... Looks like the "new" naqp.dom problem
> was just that the
> > line
> >
> > vo = vo, nf, lab needed to be vo1= vo, nf, lab
> >
> > With this corrected 672 logs qso's just fine.
> >
> > I assume the rest of the file has the multipliers correct?
> Such a simple
> > thing and what a mess it caused for us who went and
> downloaded the newest
> > naqp.dom as we were advised to. These updates should have
> been supplied with
> > the TR 672 program updates.
>
> Who advised you to download this file?
>
> And where did you download it from?
>
> As far as I can tell the files that are in the all672.zip file
> do not have the problems that you describe.
>
> --
> George Fremin III - K5TR
> geoiii@kkn.net
> http://www.kkn.net/~k5tr
>
>
>
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
|