Last night in the NAQP I had comments about my keying that was causing =
some confusion for the listeners and also for me!!
For some reason the first character of the QSL message that the computer =
sends "sticks" on for what seems like a long time maybe half a sec or =
so...all the time. !....It only happens just prior to the QSL messages =
when TRLog is writing the Q to the log edit window. There is some =
setting to do with the PTT and CW send delay that isn't right. It =
doesn't happen when I call in S&P or when calling CQ and responding to =
a caller.....only with the second ENTER key to put the Q in the log. I =
stopped my contesting at one point to see if I could figure it out as =
it wasn't happening with other config files for other contests although =
it has happened before at other times. I reset the PTT ENABLE to TRUE =
and set the delay to about 10 and rebooted the PC and it seemed to not =
be as bad....but the sticking is still there. I'm still working on =
it. Something may have changed in the PC as well. This all started =
around the time I wired my 25PIN LPT1 Plug to accept a paddle so I could =
use the paddle with TRLog for chatting etc ....
I am using a FT1000MP with VOX off and the BK IN button set for QSK and =
the internal KEYER turned off. What settings should I be using for the =
PTT and the CW DELAY etc??
I am running TRLog on a 330mhz notebook with WIN98...TR runs in a DOS =
window so are there any AUTOEXEC.BAT or CONFIG.SYS commands that may be =
impacting this issue??
Tnx to all for the Q's in NAQP
73 Frank VO1HP
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|