Hi Al,
I may be confused with the terminology but on pages 80 and 81 of the version
9 CT User's Manual, under CA QSO Party, it states (in part):
"The logging line lists your QSO S/N, Band, Time, Called Station's Call Sign,
His S/N, State or Province, Mode, Multiplier."
As an example:
1 20 2001 W5T 25 TX TX
In the above example my first contact of the contest was on 20 mtrs at 2001Z
with W5T.
W5T gave me his S/N of 25 and his state as Texas. When I hit return to log
the contact CT filled in TX in the Multiplier column as a new mult for me. I
do not make any entry in this column, CT does it for me when I hit enter.
Let's say the op at W5T on 20 asks me if I can go to 15 and work them there.
So I QSY to 15 and work them again for my second QSO of the contest. My log
example:
2 15 2003 W5T 26 TX __
When I hit return the multiplier column is left blank by CT. It is my
understanding that this is because once you work a state or province on any
band it no longer counts as a new multiplier. This is how CT logged my
contacts during the contest. As I entered each call sign I heard, I would
get a little prompt of "Needed call" or "New Multiplier" or the dreaded
"DUPE" as I hit tab to check for dupes and partials before calling the
station (I was S&P mostly) to work him.
The CT manual calls it a multiplier for the very first time you enter a state
or province, otherwise it leaves that column blank when you work that state
or province a second, third, fourth, etc, time on any new band.
If this is wrong please let me know as I have a serious problem in my score.
73
AD6E@aol.com wrote:
>
> Hi Alan,
>
> The QTH field in your log is just that, a QTH field. It is not a MULT field.
> To my mind, leaving it blank simply means you didn't copy it (even if it may
> be obvious from the call). If you work VY1JA would you leave the QTH blank
> because everyone knows the QTH anyway? I don't think so. Same reasoning goes
> with working G3ABC and not logging UK (or G3).
>
> 73, Al AD6E
>
> In a message dated 10/13/01 19:49:38 Greenwich Standard Time,
> k6acz@earthlink.net writes:
>
> << Please correct me if I am wrong (and I may be) but I use CT. In CT it logs
> the mult (state) the first time you log it on any band. But then if you work
> them again on another band it does not count as a mult since you already
> worked them on another band, and so the mult field remains blank.
> If this is NOT correct then I have a lot of fixing to do.
> As for DX, CT accepts only certain prefix indicators for each country.
> Example, I worked a German station with a DJ prefix. But CT wouldn't except
> DJ, only DL. Sorry I can't help you with the OKLA versus OK1 example. I
> would suspect if you logged it as OK it would be treated as OKLA, but am not
> sure.
> GL and 73
> 73
> >>
--
__________________________________________________________________________
Amateur Radio Station K6ACZ
Anaheim, Southern California, USA
Quality Engineer, The Boeing Company, Retired
Aviation Chief Warrant Officer, U.S. Coast Guard, Retired
U.S. Coast Guard, Always Ready, Always There
Every hour, Every day, Around the Clock and Around the World
SEMPER PARATUS
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|