Hello Tree.
Here some requests.
1)
I would like TR "NOT" to key-down the TX while waiting
the choice of the right config file!! at startup!!
2)
Possibility, if PTT not used,
to decide whether to have it set: high or low??
PTT ENABLE = FALSE
PTT REST STATE = HIGH (or LOW)
The reason of the request is becouse
I discovered that my problem of not interfacing
correctly the IC706, with the home made
RS232 adapter,was due to the fact that, the adapter,
gets its power supply from the PTT pin (from the DB9 connector) which is
only asserted when transmitting!
In fact when CQing, the radio is polled and the freq displayed.
It works fine if I use the parallel port for cw keying
but I have the printer on that port!
Thank you Tree,
(and I totally approve the K6LL kudos also!!)
Bob,I2WIJ
mailto:i2wij@qsl.net
http://www.qsl.net/i2wij/
stop by and leave your signature on the GuestBook!
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|