just cross posting another testament for the big MM who have made the jump...
---------- Forwarded message ----------
From: Tim Duffy K3LR <k3lr at k3lr.com>
Date: Feb 19, 2007 10:20 PM
Subject: [WT-support] WInTest Notes ARRL CW DX
To: WT <support at win-test.com>
A few notes from the K3LR multi multi operation this weekend.
WinTest worked very well. All operators (including Ken, K1EA who wrote CT) were
impressed!
This was K1EA's first time to see and use WinTest!
#1 When using the F keys to send CW, is it possible to insert a 1/2 space
between sending F key multiple times or multi F keys?
For example hitting F4 twice to send MYCALL (K3LR) results in K3LR being sent
twice with NO space between the R and the K. So K3LRK3LR (runs together) is
sent instead of K3LR K3LR.
Or hitting F2 and F4 results in 5NN PAK3LR instead of 5NN PA K3LR. The PA and
K3LR run together without a 1/2 space.
#2 When entering MYCALL in the log (for a bad QSO to remove later with REMOVE
MYCALL) the calculations for points per QSO are not correct as the MYCALL QSO is
counted as a QSO, but 0 points. Can MYCALL in the call field be treated as a
DUPE for the purpose of QSO count and points?
#3 In the RCVD REPORT area:
Now the WTlog has 599KW or 5991000 or 599799 (runs together)
Can a space or two be put in-between the RST and the POWER?
So it is 599 1000 or 599 500 or 599 799
That way all RSTs are in a column and all POWER information are in their own
defined column instead of running all togther.
SUPER JOB Olivier and Larry!
73!
Tim K3LR
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
--
73 - Paul K4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ
==============================
http://www.dx-is.com USA Spiderbeam Distributor
http://www.dx-is.org
==============================
|