Thanks Paul.
I have just returned home and edit the SD.INI , SD_RIGPORT to 0, and Bingo, it
worked perfect.
Thanks for the advise.
Tele
KP4P
Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: SD-User <sd-user-bounces+kp4p=hotmail.com@contesting.com> on behalf of
Telesforo Figueroa <kp4p@hotmail.com>
Sent: Saturday, April 30, 2022 8:29:24 AM
To: Paul O'Kane <pokane@ei5di.com>; sd-user@contesting.com
<sd-user@contesting.com>
Subject: Re: [SD-User] Program Freezes
Hello Paul:
Thanks for the quick reply.
Well, I am out of the Shack in an activity with my daughter and grandaughters.
I will try the INI files change upon return. Now, let be briefly answer your
questions.
When I touch the SD icon on my PC I immediately get to choose which template.
I, for example, select "FOC QSO Party" template. <enter>.
Then I get the usual entry page with a statement below that reads like
this"Winkey is enabled in port 7", but no frequency display.
After that I am supposed to write PORTS <enter>,to select "R" and do the usual
port selection, type of radio, etc, but the cursor square is not present. The
page is " frozen" and even the " X" in the upper right hand corner is grey.
There is no way to write anything on the screen or delete the page. Then have
to use Task Manager to delete SD.
I have my personal Laptop on the side, and transfer
all the wires and can easily get SD to communicate with my FT1000MP easily.
Please advise.
Tele
KP4P
Get Outlook for
iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=05%7C01%7C%7C7efc6544a9ca407c4e0508da2aad7a40%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637869221810022984%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=%2BS8OCqNpzIear4C5pYA5eGehQcQaVEu9X3aGWyM8Nl8%3D&reserved=0>
________________________________
From: SD-User <sd-user-bounces+kp4p=hotmail.com@contesting.com> on behalf of
Paul O'Kane <pokane@ei5di.com>
Sent: Saturday, April 30, 2022 3:00:01 AM
To: sd-user@contesting.com <sd-user@contesting.com>
Subject: Re: [SD-User] Program Freezes
On 30/04/2022 01:41, Telesforo Figueroa wrote:
> However, when trying to use SD at the same PC to drive my old Yaesu FT1000MP,
> alone, no Win4Yaesu, of course, SD freezes when open. I can not write and
> finally have to use Task Manager to end SD.
This may be a rig-control issue between the 1000MP and SD. The way to
find out is to disable rig-control before starting SD. Edit SD.INI to
set the SD_RIGPORT parameter to zero. Save the change and then run SD.
At what stage did SD freeze - was it at the logging screen, or earlier?
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fsd-user&data=05%7C01%7C%7C7efc6544a9ca407c4e0508da2aad7a40%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637869221810022984%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zbCG0KeIs8lP9v1XApOyQKshwjrclg36SFfDoge7KH4%3D&reserved=0
_______________________________________________
SD-User mailing list
SD-User@contesting.com
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fsd-user&data=05%7C01%7C%7C7efc6544a9ca407c4e0508da2aad7a40%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637869221810022984%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zbCG0KeIs8lP9v1XApOyQKshwjrclg36SFfDoge7KH4%3D&reserved=0
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|