Andy,
You will be there on Saturday when I connect everything together for NFD, the
setup is the same as you have, i.e. a Laptop with an IC756 Pro III. Everything
is simple but you need everying in the right place at the right time.....
Cheers,
Gwyn - G4FKH
________________________________
From: andrew kersey <goibn@kersey1.freeserve.co.uk>
To: SD-USER <sd-user@contesting.com>
Cc: gwyn g4fkh <g4fkh@btinternet.com>; nic hickson <m0nrh@hf-radio.com>
Sent: Thursday, 4 June, 2009 3:40:05 PM
Subject: laptop to ic756pro3 connections
HP laptop to IC756pro3 - via RIGtalk.
Stereo lead is from the RIGtalk, which is plugged into the USB, to mono
connector
to CLV remote connection at the rear of the IC756pro3.
I have managed to get the frequency to change on SD.
Now I am trying to get the laptop to key the transmitter.
When I press F1, SD says it is keying, but it doesnt key.
Do I need another lead from the laptop, to the key input at the
rear of the tranmsitter or should RIGtalk CAT CIV interface do it?
All help gratefully received.
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|