Okay, so you think if I adjust my IF shift it will help?
When I click either filter in its like a dead band as I tune along. Like a
60db attenuator is on.
> From: w7ry@inbox.com
> To: ve3vid@hotmail.com; rtty@contesting.com
> Subject: Re: [RTTY] INRAD filter question
> Date: Sat, 25 Sep 2010 19:14:30 -0700
>
> you can probably use the BPF and IF shift to center LSB into the filters
> passband. Then you will have to use 2125/2295 for tones.
>
> 73
> Jim w7RY
>
>
> --------------------------------------------------
> From: "David VE3VID" <ve3vid@hotmail.com>
> Sent: Saturday, September 25, 2010 7:06 PM
> To: "RTTY contest group" <rtty@contesting.com>
> Subject: Re: [RTTY] INRAD filter question
>
> >
> >
> > The laptop is a Gateway running XP, N1MM, into a SignaLink USB outboard
> > sound card, into the ACC port on the TS-450s. I am neither for or
> > against true FSK, just the SignaLink allows me to do many other types of
> > "sound card" digital modes such as PSK and Olivia.
> >
> >
> >
> > I was able to do RTTY no problem with the system before the 400hz filters
> >
> >
> >
> >
> >
> >> From: w7ry@inbox.com
> >> To: ve3vid@hotmail.com; rtty@contesting.com
> >> Date: Sat, 25 Sep 2010 18:52:16 -0700
> >> Subject: Re: [RTTY] INRAD filter question
> >>
> >> FSK is MUCH better than AFSK.... What are you using for a computer and
> >> software? I use windows XP and MMTTY with N1MM. Works just fine in FSK
> >> mode.
> >>
> >> Is there a particular reason you don't want to run FSK?
> >>
> >> 73
> >> Jim W7RY
> >>
> >>
> >> --------------------------------------------------
> >> From: "David VE3VID" <ve3vid@hotmail.com>
> >> Sent: Saturday, September 25, 2010 6:48 PM
> >> To: "RTTY contest group" <rtty@contesting.com>
> >> Subject: Re: [RTTY] INRAD filter question
> >>
> >> >
> >> > Wow. Well if thats the case it was an expensive waste of $300.
> >> >
> >> > However, why would the filters be unusable in AFSK(LSB)? Dont they just
> >> > narrow the IF bandpass to 400hz?
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >> From: w7why@frontier.com
> >> >> To: rtty@contesting.com
> >> >> Date: Sat, 25 Sep 2010 18:43:48 -0700
> >> >> Subject: Re: [RTTY] INRAD filter question
> >> >>
> >> >> Hi David
> >> >>
> >> >> I have the same setup as you--2 Inrad filters. They won't work in
> >> >> AFSK.
> >> >> You have to run FSK to use the narrow CW filters. 73
> >> >> Tom W7WHY
> >> >>
> >> >>
> >> >> >
> >> >> > Ummmm.......nope. I had the rig in LSB (AFSK). And the tone pair as
> >> >> > set
> >> >> > by MMTTY is 2125/170
> >> >> >
> >> >> >
> >> >> >
> >> >>
> >> >> _______________________________________________
> >> >> RTTY mailing list
> >> >> RTTY@contesting.com
> >> >> http://lists.contesting.com/mailman/listinfo/rtty
> >> >
> >> > _______________________________________________
> >> > RTTY mailing list
> >> > RTTY@contesting.com
> >> > http://lists.contesting.com/mailman/listinfo/rtty
> >> >
> >>
> >>
> >>
> >> >
> >> > No virus found in this incoming message.
> >> > Checked by AVG - www.avg.com
> >> > Version: 9.0.856 / Virus Database: 271.1.1/3159 - Release Date:
> >> > 09/25/10
> >> > 10:45:00
> >> >
> >> _______________________________________________
> >> RTTY mailing list
> >> RTTY@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/rtty
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
>
>
>
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.856 / Virus Database: 271.1.1/3159 - Release Date: 09/25/10
> > 10:45:00
> >
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|