RTTY
[Top] [All Lists]

Re: [RTTY] LoTW/Makrothen (Contesting)

To: "Andrei Stchislenok" <asnp3d@gmail.com>, <w7why@verizon.net>
Subject: Re: [RTTY] LoTW/Makrothen (Contesting)
From: IronmanY2k <IronmanY2K@triathlete.com>
Reply-to: IronmanY2K@triathlete.com
Date: Wed, 10 Oct 2007 19:13:36 -0700
List-post: <mailto:rtty@contesting.com>
I only use one computer, but I do use two monitors.  My SO2R device is the 
micro Keyer 2R+.  This is a fantastic
 piece of gear.  It has two built in sound cards and only uses one usb port. 
FSK, CW and phone all work flawlessly.
 It's a bit pricey but well worth it in my opinion.

Andrei, you only have to email the cabrillo log for the Makrothen contest.  For 
the LOTW contest you upload your log to the ARRL's LOTW.

LOTW "Logs:  Contest logs in either Cabrillo Format or ADIF format should be 
uploaded to LotW any time after the contest, but no later than 30 days after 
the contest.  No hand-written logs or any other format will be accepted. Use 
the following contest names on the "CONTEST:" line of the Cabrillo log file: 
"LOTW-SSB" or "LOTW-CW" or "LOTW-RTTY". If an adi/adif file is used to upload 
logs to the ARRL site, then there is no need to include the name of the 
contest."

73, Jim
AD6WL

-------------------------------------------------

Hi Jim

Do you use 1 computer or 2?  Interesting setup.  Don't use WL, use N1MM, 
here but it would be something to play with.

I only use 1 computer here with 2 radios so might be different.

73 and thanks for all the contest Q's.
Tom W7WHY


--- asnp3d@gmail.com wrote:

From: "Andrei Stchislenok" <asnp3d@gmail.com>
To: IronmanY2K@triathlete.com
Cc: rtty@contesting.com
Subject: Re: [RTTY] LoTW/Makrothen (Contesting)
Date: Wed, 10 Oct 2007 21:52:26 -0400

Jim - fantastic!

I did it; looks exactly like in your screenshot, hi!

Just one question - Do I have to email the same Cabrillo Log to both
Contests?

Thank you

73's Andrei EW1AR-NP3D


2007/10/10, IronmanY2k <IronmanY2K@triathlete.com>:
>
> First let me apologize for the hasty written instructions but it is late
> and well past my bedtime.
>
> There was a previous email concerning using the same logging program for
> the Makrothen and the LOTW RTTY contest and about how it would be too hard
> to modify them to work for both contest.  I believe I have done this in
> about 5
> minutes.  I have also uploaded a screen shot which the URL is listed at
> the end.  Please take a look at it and
> correct me were I'm wrong or give advice on improvements.
>
> I had not trouble setting up writelog for the extra two fields required
> for the LOTW contest.
>
> 1. Start writelog, start a new log, select Makrothen contest and put in
> your paramaters
>
> 2. Select Contest, Exchange Format Setup and the next window select No.
>
> 3. Click on New.
> Check the following boxes: Number. Prompt. Required. RST.
> On the top Caption type in the field you want. Type in RST
> Click on Save
>
> 4.  Click on New
> Check the following boxes: Print. Prompt. Required.
> On the top Caption type in the filed you want.  Type in State.
> Click on Save
>
> Click on OK and OK again.
>
> You can go to this website and see what my Wrtielog screen looks like.
>
> http://www.freewebs.com/ad6wl/photogallery.htm
>
> 73, Jim
> AD6WL
>
>
>
>
>
>
> --- rtty-request@contesting.com wrote:
>
>
>
>
> _____________________________________________________________
> Get YourName@Triathlete.com web e-mail - http://www.Triathlete.com
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>



-- 
73's Andrei
EW1AR-NP3D
WAS RTTY #455 (all via LoTW)
----------------------------------------------------
DXCC RTTY via LoTW only
Who has what? - World Wide Rating
Please visit: www.k4fo.com/cqrtty/




_____________________________________________________________
Get YourName@Triathlete.com web e-mail - http://www.Triathlete.com
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>