> It works fine. I just have to get n1mm setup correctly. I'm able to
> receive,
> but I needed to setup the macros for TX. Now that I have that correct, it
> will send, but my EXCH macro is sending 599-CT. I'm not sure where it's
> getting CT from. It should be sending NV.
Mark,
Go to the Config tab then select Change Your Station Data and fill it out as
required.
Scott NØIU
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|