Hi all,
1. Select a mode under the MODE tab, (try MT 63)
2. Select MODE SETTINGS
3. Look at bottom of the pop-up screen, and select ON START under VIDEO ID
4. Now, Click EDIT
5. Make your callsign by clicking on the Pixels and save it.
Simple solution to the mystery..
73 have fun
Buddy WB4M
----- Original Message -----
From: "Graham Ridgeway" <m5aav@btinternet.com>
To: <psk31@yahoogroups.com>; <070@yahoogroups.com>;
<eupskclub@googlegroups.com>; <rtty@contesting.com>
Sent: Friday, January 26, 2007 2:26 PM
Subject: [RTTY] Intrigued
> Greetings All,
>
> While monitoring 20m late this afternoon using MixW - there appeared
> on the waterfall a callsign........Yes that's correct ON THE WATERFALL
> - spread out over about 1khz, almost like a picture.
>
> At first I thought I was hallucinating, then a few minutes later it
> rolled across [or rather down] again.this time complete with the MixW
> 'Butterfly' and I grabbed a screen print - which I have out at...
> http://s40.photobucket.com/albums/e208/strathnaver/?action=view¤t=iz0ask.jpg
>
> I was just wondering 'how did they do that?' as it clearly requires
> multiple synchronised audio tones.
>
>
> 73 Graham M5AAV
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|