"Joe Subich, W4TV" wrote:
> RotorEZ from Idiom Press will calculate the offset automatically
> by closing a switch. It might be possible to read the direction
> for both antennas from the bottom rotor and control both the
> top rotor and the offset with a simple toggle switch (0/90).
-----------
Even more simple solution IF both rotors are compatible or the same.
>From the CONTROL box for the rotor, wire each connector to the "common"
of a 6 or 8 pole( what ever you need ) , 2 position Centralab rotary
switch.
Then wire the wires FROM the rotor to switch positions 1 and 2.
Switching rotors is then merely a matter of selecting which you want.
I control 4 separate Tailtwisters on 4 different towers this way.
( and wiring that switch was a BITCH )
73
Ed
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|