OK, I can help.... I have two of these and they work great as tuning
scopes...
As you look at the rear of the YO-100, on the right side there are four
RCA plugs, connect two RCA patch cored from the PK232, one going to
the AF (RCA Plug) and the other to HIN (RCA plugs) these are the top
two RCA plugs.
That is the way I do it and they work great. Hope this help!
73!
On 21 Aug 02, at 21:30, WI8W wrote:
> PK-232. I know about the jack in the back of the TNC but I do not have any
> idea which connectors on the back of the YO-100 to hook the connection to.
> The scope has a RTTY button on the front but I know nothing about how it
> works or how to set it up for rtty tuning.
>
> thanks
>
> Thom WI8W
>
>
> ----- Original Message -----
> From: "Jim Johnson" <jim@kc4hw.net>
> To: "WI8W" <wi8w@arrl.net>; <rtty-admin@contesting.com>
> Sent: Wednesday, August 21, 2002 12:18
> Subject: Re: [RTTY] YO-100 Setup Help Please
>
>
> > What TNC or Terminal unit are you using?
> >
> >
> >
> > On 21 Aug 02, at 11:07, WI8W wrote:
> >
> > > Anyone have information on how to setup a Yeasu YO-100 Monitor Scope
> > > for use as a RTTY tuning aid? I have one of those in the shack but I
> > > do not have a manual.
> > >
> > > thanks
> > >
> > > Thom WI8W
> > >
> > >
> > >
> > > _______________________________________________
> > > RTTY mailing list
> > > RTTY@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/rtty
> > >
> >
> >
> >
> > Jim Johnson, Melbourne, Florida
> > jim@kc4hw.net - http://www.kc4hw.net
> > DXCluster RF Connection: 144.95
> > Telnet://kc4hw.homelinux.net:8000
> >
>
>
Jim Johnson, Melbourne, Florida
jim@kc4hw.net - http://www.kc4hw.net
DXCluster RF Connection: 144.95
Telnet://kc4hw.homelinux.net:8000
|