I am running a "hockey puck" LED that takes a "wedge" style bulb. It takes
~12v. I feed it with a conventional doorbell transformer. I also ran it on a
small 12v shack PS for a while. Seems RFI free.
Perhaps try the LED can light but replace the PS with a conventional one (not a
switcher). It helps if you can find one that takes ~12v as you might have an
old shack PS available to test with.
7 3 Bob
N2SCJ
-----Original Message-----
From: RFI [mailto:rfi-bounces+n2scj-lists=outlook.com@contesting.com] On Behalf
Of David Winarsky
Sent: Saturday, June 18, 2022 7:05 PM
To: David Hale <astronomerdave@gmail.com>
Cc: rfi@contesting.com
Subject: Re: [RFI] LED recessed lighting
I tried Amico and it gives me bad RFI on 40m. I’m also looking for advice on
what to switch to. Someone on the list recommended Lithonia not too long ago
and I’ve been planning to try a few of those before replacing the entire set.
73,
David K6ZD
> On Jun 18, 2022, at 15:35, David Hale <astronomerdave@gmail.com> wrote:
>
> Does anyone have experience with or can recommend an LED can light
> that is RFI-friendly? My wife wants recessed lighting in a spare room
> we’re turning into a “den”. 73 de N3WTK
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|