Hey, Milan,
I think I understand what you want, and I don't think that will
happen...yet. I don't think it does that on any other radio either, as I've
been using DX4Win with my Yaesu 1000D and MP MK-V and neither of them would
equalize the two vfos. I believe you'll still have to put the A>B button to
do that, just like on the other popular radios.
As you have noted, the radio responds perfectly to a split frequency spot.
Perhaps the folks at Ten Tec and engineer that as a menu selection in the
future, but personally, I would not want that to happen. I use the other
receiver to store frequencies I want to return to.
Maybe someone else can offer an idea as to how to accomplish what you want,
but I can't...and I don't think I'd want it to if it could.
Larry, N0XB
Northfield, MN
-----Original Message-----
From: orion-bounces@contesting.com [mailto:orion-bounces@contesting.com] On
Behalf Of Milan Gütter, OK1FM
Sent: Sunday, March 06, 2005 5:47 PM
To: orion@contesting.com
Subject: [Orion] Orion 565 with DX4WIN
Hi OMs,
Who is using TEN-TEC ORION 565AT (ORION 565)
controlled by DX4WIN6.04 ?
I need to know how set the DX4WIN Radio Database
that both displayed frequencies at ORION
(A and B) change when click on a DX spot.
At present, when click on a DX4WIN DX spot,
only the upper ORION (A) frequency goes
to the DX spot frequency.
The lower frequency (B) stay at previous QRG.
(When a QSX is given by DX spot, the lower
(B) display works right, the right QSX frequency is set)
Who can help?
73 Milan, OK1FM
ok1fm@ges.cz
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|