One of my fellow club members handled the problem of the flashing CAT
light on the Yaesu as follows:
Scotch 33+ over that part of the display..
Justa thought...
K4OJ
alsopb wrote:
> Dave,
>
> Please look into the FT100 mode problem after fixing this timing bug.
> It appears that nearly everything else works OK with it.
>
> I too found the FT1000MP CAT light blinking at once per second a real
> distraction. Changed it to once per 3 seconds in the everyday logging
> program! Of course, everyday logging is not contesting .......
>
> 73 de Brian/K3KO
>
>
> "David A. Pruett" wrote:
>
>>At 06:42 AM 8/26/02 -0400, Bob Patten wrote:
>>
>>>In version 10.57, the polling frequency of the 1KMP is greatly decreased
>>>
>>>from all earlier versions to the point of being problematic. Was there a
>>
>>>reason for reducing the polling rate, or is this a side effect of some
>>>other fix or added feature?
>>>
>>Bob,
>>
>>No, there was no reason for reducing the polling rate, nor is this a side
>>effect of some other fix or added feature. All that leaves is a
>>programming screw-up...
>>
>>All of the timed features in NA work off one function which reads the
>>computer's master clock and get's blipped 18.2 times per second. I had
>>heard reports of problems with timing on things like the CQ-repeat
>>interval. This past FD, I saw the problem with the DVK repeat time and
>>even spent some effort trying to debug it (I was the VHF op and hence had
>>lots of time on my hands, plus the logging computer was my NA programming
>>laptop) but did not make any progress. I did not notice the slower radio
>>polling, either on FD or during any of the other contests I've run recently.
>>
>>This bugged me so tonite, using Bob's note as a clue I started
>>experimenting. If computer radio control is turned off, the CW and SSB
>>repeat delays are correct - with computer radio control is turned ON, the
>>repeat delays are doubled. Again, since all of the timing is coming from
>>one source in the program, its reasonable to assume that somehow this is
>>what is causing the polling interval to double.
>>
>>I have not yet found the source of the problem, but with this important
>>clue I now know where to look. I wanted to respond to Bob's note to
>>confirm what he was seeing, and to let everyone know we're working on it.
>>
>>In case anyone was wondering, the radio polling intervals for non-Yaesu
>>radios is once per second. Yaesus are once every three seconds because I
>>found that the !&@$&#%^ CATS light on the display (which blinks every time
>>the radio receives a command) was too annoying at once per second. When
>>SO2R, each radio is polled at its own rate so the interval is not stretched
>>out.
>>
>>We should have this fixed soon. Thanks for N4BP for his observation about
>>the polling interval, and also to K6NA for his note about the repeat delay.
>>
>>Dave/K8CC
>>
>>_______________________________________________
>>NA-User mailing list
>>NA-User@contesting.com
>>http://lists.contesting.com/mailman/listinfo/na-user
>>
> _______________________________________________
> NA-User mailing list
> NA-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/na-user
>
>
>
|