Karlnet
[Top] [All Lists]

RE: [Karlnet] Ubicomm Karlnet Clients

To: "'Norm Young'" <lists@applegatebroadband.net>,"'Karlnet Mailing List'" <karlnet@wispnotes.com>
Subject: RE: [Karlnet] Ubicomm Karlnet Clients
From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Fri, 31 Oct 2003 00:48:45 -0500
List-post: <mailto:karlnet@WISPNotes.com>
the embedded kn-50 units look amazing, they also include temperature and
speaker - both working via web front end

anybody have a picture of the inside of the antenna w/ the kn50
board/radio?


> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]
> On Behalf Of Norm Young
> Sent: Thursday, October 30, 2003 10:10 PM
> To: Karlnet Mailing List
> Subject: Re: [Karlnet] Ubicomm Karlnet Clients
> 
> MapleNet (http://www.maplenet-inc.com/) has them.  They have the
> Ubicom/KN-50 (Blackbird) radios.  I've set up quite a few clients on
them,
> and I'm pretty happy.   I can recommend their i19 CPE, which is a
KN-50
> with
> a enclosure/19dB panel and a 24vdc PoE for the longest of runs.  Had
one
> KN-50 recently that shipped with a i19, with some network issues, but
am
> assuming that I'll get a replacement soon.
> 
> Norm
> 
> ----- Original Message -----
> From: "Blair Drew Davis" <theory@datawise.net>
> To: <karlnet@WISPNotes.com>
> Sent: Thursday, October 30, 2003 6:51 PM
> Subject: [Karlnet] Ubicomm Karlnet Clients
> 
> 
> > We have several of the Ubicomm Karlnet Clients in place talking to
> > Karlnet Turbocell 4.43 ap's.
> >
> > These work quite well, with one major issue.
> >
> > The Ubicomm's won't pass traffic when used with a Karlnet COR 4.43
> > flashed on to a WavePoint II or AP-1000 if it is the older hardware
that
> > has only a 10Mbit ethernet port.  If the hardware used is the later
> > WavePoint IIE or Ap-1000 with the 10/100Mbit ethernet port, it works
> > fine.  This problem has been reproduced by CWLabs.  I have heard
that
> > this problem is in the Ubicomm's and that there is a flash upgrade
to
> > fix it, but I have not yet found it.....
> >
> > Has anyone tried using the Ubicomm's with a Lucent COR 4.15 as the
AP?
> >
> > We have been getting the Ubicomm's from CWLabs.  CWLabs says they
may
> > not be carrying the Ubicomm's any longer.  Anyone know of other
> > suppliers carrying them?
> >
> >
> > --
> > Blair Davis
> > Computer Adjusters of Allegan
> > www.computeradjusters.com
> > (616) 673-0054
> >
> > AOL Instant Message Screen Name       theory240
> >
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> 
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> --
> [This E-mail scanned for viruses by Declude Virus]


<Prev in Thread] Current Thread [Next in Thread>