Karlnet
[Top] [All Lists]

RE: [Karlnet] Injection Moulded Outdoor Enclosure for WCPE+

To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] Injection Moulded Outdoor Enclosure for WCPE+
From: "Nate McLain" <nate@ctrail.net>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Wed, 2 Jul 2003 21:39:48 -0500
List-post: <mailto:karlnet@WISPNotes.com>
Posting a URL for the document might be better, it appears that the list
strips the attachment.

Nate

-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Kevin Knuth
Sent: Wednesday, July 02, 2003 8:26 PM
To: wesley allison; Karlnet Mailing List
Subject: RE: [Karlnet] Injection Moulded Outdoor Enclosure for WCPE+


All,

Karlnet does have a design document for people wanting to make enclosures
for our boards.

I have attached that document for you to look over, maybe it will help!

Kevin

-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of wesley allison
Sent: Wednesday, July 02, 2003 5:00 PM
To: Karlnet Mailing List
Subject: Re: [Karlnet] Injection Moulded Outdoor Enclosure for WCPE+


I have purchased a Carlon PVC junction box from Lowes for 25 dollars and it
is rated nema 4/4x water proof. I added a few electrical bulkheads so I
think the over all cost of my box is about 30 bucks. I will include a
picture shortly. With that being said if you could incorporate all this in a
molded box with out any assembly required for the same price I would love to
buy some.

wes
----- Original Message -----
From: "Caleb Carroll" <karlnet@pathcom.ca>
To: <karlnet@WISPNotes.com>
Sent: Wednesday, July 02, 2003 4:13 PM
Subject: [Karlnet] Injection Moulded Outdoor Enclosure for WCPE+


>
> I'm looking into having 1000 of these made at an injection moulding
facility.  I have 2 questions for everyone on this list:
>
> - Anyone already getting an outdoor enclosure with N-Type and RJ45
weatherproof bulkheads made?  If yes, what dimensions & what NEMA rating?
> - Anyone interested in buying these if we go ahead an have them made?
Price would be approximately $55-$60 US per unit including both bulhead
connectors.  Would be NEMA 3R (rain proof) or NEMA 4 (water proof).
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>