Tony,
That statement isn't true... I have some flashrom units that have 4
interfaces... 1 Ethernet & 3 Radio Interfaces.
But you have to buy the 4 Port Flashrom Module (HF-600).
And the SF-4300 license does work with that setup. I have done it!!
Nate
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Tony Morella
Sent: Sunday, May 11, 2003 11:40 PM
To: 'Norm Young'; 'Karlnet Mailing List'
Subject: RE: [Karlnet] How many wireless interfaces does
SF-4300(TurboCellSatellite for FlashROM) support?
Norm SF-4300 will only work with 2 interfaces.
Sincerely, Tony Morella
Demarc Technology Group, A Wireless Solution Provider
Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
http://www.demarctech.com
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Norm Young
> Sent: Sunday, May 11, 2003 4:22 PM
> To: Karlnet Mailing List
> Subject: [Karlnet] How many wireless interfaces does
> SF-4300(TurboCell Satellite for FlashROM) support?
>
>
> I'm going to replace the second channel doing backhaul of an
> AP-1000 at our main WIPOP using the base station software
> with a dedicated backhaul radio.
>
> I'd like this system to support several radios on board, as
> I'd like to be able to make connections to several PtP
> WIPOP/microWIPOP locations.
>
> So, I'm wondering if I use a microATX board, and say, 3-4
> radios on board, will the SF-4300 (TurboCell Satellite for
> FlashROM) be able to make the
> connections on those radios to one PtP TC client? Will
> SF-4300 support
> more than two radios?
>
> I'm thinking that each one of these PtP TC clients could be a
> WPBASE running Satellite. The WPBASE+ systems for the
> microWIPOPs would have one radio making the connection back
> to the main WIPOP in TC mode, and the other radio slot would
> be doing 802.11b to make the connections to the client
> homes/businesses, if that is possible.
>
> The other alternative would be for Karlnet to offer a low
> cost alternative
> (crippled) version of the base station software for these
> small neighborhood
> fill-in mesh systems. Say something that would support,
> say, 10 clients.
>
> Currently, I do this using a SR-4000 client and the RG-1100
> coupled with a
> StarOS system or MikroTik. Not ideal. I've played with the
> idea of going
> away from Karlnet entirely on the backhaul, slotting a "g"
> radio in a StarOS system, doing my backhual with that, and
> then slotting radios for each of my PtP links to my
> neighborhood 802.11b (where due to the small numbers of
> clients, hidden-node is not a problem) microWIPOPs. One
> large advantage to
> this approach is that I can use a StarOS system running on
> one micoATX system with two radios to make a microWIPOP. No
> need to spend money on the Karlnet hardware/licences.
>
> Bottom line is that here in the geographically convoluted
> West, WISPs need
> lots of translators to fill in areas that require service. StarOS is
> moving it's product in that direction, creating a semi-mesh
> system to give us the tools to do that kind of thing. I'd
> love to do it with Karlnet, only I'm not sure that the
> flexibility exists in the product line to do it economically.
>
> Norm
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|