Provided you are not bridging or routing and you are NAT'ing....
when changing you satellites' public IP you have to do it in 2 places:-
A) under IP Host
B) under outgoing NAT
if you only change one of these you'll encounter problems, yet for some
strange reason the thing can still sometimes appear to work !
Also make sure (even though in reality BOTH are really private IP's) that
your KN sat's 'public wireless IP' and 'Private internal IP' are on
completely different subnets.
We used to run several customers 'Public' IP as private for their own
requested security reasons. This is efectively 'double natting' - We have
another nat box as their gateway.
----- Original Message -----
From: "A. Rod" <things@mail.chiriqui.com>
To: <Karlnet@WISPNotes.com>
Sent: Friday, April 18, 2003 5:57 AM
Subject: [Karlnet] radio responding to two ip's
> Hello,
>
> I have a Karlnet satellite that that responds to two IP's. I while
> back I began to change from public ip's to private ip's. One of the
> stations running SA4300 V4.02 responds both to it's old public IP and
> the the new private IP. The IP setup from the setup menu shows the
> private IP. I can use the configev tool with either IP.
>
> I have rebooted it a number of times.
>
> How can I make this radio give up it's public IP.
>
> Rod
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|