Karlnet
[Top] [All Lists]

RE: [Karlnet] 100mw or 200mW & WEP

To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] 100mw or 200mW & WEP
From: "Tony Morella" <tonylist@wwwbiz.com>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Tue, 8 Apr 2003 19:30:11 -0400
List-post: <mailto:karlnet@WISPNotes.com>
I was referring to the question about the other PCI adapter.

Sincerely,  Tony Morella 
Demarc Technology Group, A Wireless Solution Provider 
Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
http://www.demarctech.com 



> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com 
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Steve Deaton
> Sent: Tuesday, April 08, 2003 6:47 PM
> To: 'Karlnet Mailing List'
> Subject: RE: [Karlnet] 100mw or 200mW & WEP
> 
> 
> TONY:
> 
> So when you say you know they work, do you mean with 128-bit 
> wep???  I can't seem to get the 128-bit wep to work.
> 
> Steve Deaton
> IT Director
> Texas Broadband, Inc.
> (888)868.3835 ext 85 (office)
> 979.289.0148 (office)
> 979.289.5117 (fax)
> 
> 
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com 
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Tony Morella
> Sent: Monday, April 07, 2003 2:18 PM
> To: 'Karlnet Mailing List'
> Subject: RE: [Karlnet] 100mw or 200mW & WEP
> 
> Steve
> 
> The PCI/PCMCIA cards we sell are the only ones that we have 
> tested and know to work, not to say other won't. Also I am 
> hoping there will be better WEP support coming soon, I know 
> Karlnet is working on this.
> 
> Sincerely,  Tony Morella 
> Demarc Technology Group, A Wireless Solution Provider 
> Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 
http://www.demarctech.com 



> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Steve Deaton
> Sent: Monday, April 07, 2003 2:52 PM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] 100mw or 200mW & WEP
> 
> 
> Has anyone tried using 100mW or 200mW cards with WEP enabled?
>  I can only get 64-bit to work.  I have tried the three 
> different versions of firmware on the demarc website, but 
> with no luck.  I am using the XI-325H cards.  Also, what 
> PCMCIA adaptors are others using in the Karlnet FlashROM 
> units?  I am trying the Buffalo w/ a 200mW and no dice. The 
> signal goes offline every few minutes.  Works fine with the 
> 100mW cards though.  All help is appreciated.
>  
> Steve Deaton
> IT Director
> Texas Broadband, Inc.
> (888)868.3835 ext 85 (office)
> 979.289.0148 (office)
> 979.289.5117 (fax)
>  
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> 
> 


_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet



<Prev in Thread] Current Thread [Next in Thread>