TONY:
So when you say you know they work, do you mean with 128-bit wep??? I
can't seem to get the 128-bit wep to work.
Steve Deaton
IT Director
Texas Broadband, Inc.
(888)868.3835 ext 85 (office)
979.289.0148 (office)
979.289.5117 (fax)
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Tony Morella
Sent: Monday, April 07, 2003 2:18 PM
To: 'Karlnet Mailing List'
Subject: RE: [Karlnet] 100mw or 200mW & WEP
Steve
The PCI/PCMCIA cards we sell are the only ones that we have tested and
know to work, not to say other won't. Also I am hoping there will be
better WEP support coming soon, I know Karlnet is working on this.
Sincerely, Tony Morella
Demarc Technology Group, A Wireless Solution Provider
Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
http://www.demarctech.com
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Steve Deaton
> Sent: Monday, April 07, 2003 2:52 PM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] 100mw or 200mW & WEP
>
>
> Has anyone tried using 100mW or 200mW cards with WEP enabled?
> I can only get 64-bit to work. I have tried the three
> different versions of firmware on the demarc website, but
> with no luck. I am using the XI-325H cards. Also, what
> PCMCIA adaptors are others using in the Karlnet FlashROM
> units? I am trying the Buffalo w/ a 200mW and no dice. The
> signal goes offline every few minutes. Works fine with the
> 100mW cards though. All help is appreciated.
>
> Steve Deaton
> IT Director
> Texas Broadband, Inc.
> (888)868.3835 ext 85 (office)
> 979.289.0148 (office)
> 979.289.5117 (fax)
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|