Attached is a write up on Inhibit NAT
Doug
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Larry Yunker - Cyber Broadcasting
> Sent: Monday, October 21, 2002 4:49 PM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] New KarlNet .bin files released
>
>
> Anyone from Karlnet care to enlighten us and clear up our
> speculation??? If
> they have found a way to block NAT, I have an immediate need for some
> upgrade licenses!
>
> ----- Original Message -----
> From: "Bob Hrbek" <bhrbek@jagwireless.com>
> To: <karlnet@WISPNotes.com>
> Sent: Monday, October 21, 2002 3:34 PM
> Subject: Re: [Karlnet] New KarlNet .bin files released
>
>
> > :) I'm guessing that it just creates a Firewall type rule that
> drops any
> of
> > the private nat addresses on the public side of the RG. It would seem
> that
> > even if you enabled bridging (while running nat) it would drop
> the private
> > IP's from the selected interface.
> >
> > -bob
> >
> >
> > ----- Original Message -----
> > From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
> > To: <karlnet@WISPNotes.com>
> > Sent: Monday, October 21, 2002 3:06 PM
> > Subject: RE: [Karlnet] New KarlNet .bin files released
> >
> >
> > > I asked this some exact question and some wise-ass gave me the
> > > "definition" of inhibit.
> > >
> > >
> > >
> > > Dan Metcalf
> > > Wireless Broadband Systems
> > > http://www.wbsysnet.com/
> > > 877-685-0578
> > > dan.metcalf@wbsysnet.com
> > >
> > >
> > > > -----Original Message-----
> > > > From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com]
> > > On
> > > > Behalf Of Larry Yunker - Cyber Broadcasting
> > > > Sent: Monday, October 21, 2002 4:00 PM
> > > > To: karlnet@WISPNotes.com
> > > > Subject: Re: [Karlnet] New KarlNet .bin files released
> > > >
> > > > What exactly does this do?
> > > >
> > > > - Inhibit Private NAT through selected Interfaces
> > > >
> > > > Does this somehow block a customer from running a NAT router (like a
> > > > Linksys
> > > > Cable-Modem-router) behind say an RG1000? If so, HOW????? Would it
> > > also
> > > > block Internet Connection Sharing??
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Charles Chia Sheng Wu" <cwu@cwlab.com>
> > > > To: <Agere@part-15.org>
> > > > Cc: <isp-wireless@isp-wireless.com>; <karlnet@WISPNotes.com>;
> > > > <equipment-l@wisp-equipment.net>
> > > > Sent: Wednesday, October 16, 2002 2:59 PM
> > > > Subject: [Karlnet] New KarlNet .bin files released
> > > >
> > > >
> > > > > v4.27
> > > > >
> > > > > New Features of 4.27
> > > > > - MAC Auth Library (AP Radius and MAC Access List)
> > > > > - IP Multicast Pruning
> > > > > - Inhibit Private NAT through selected Interfaces
> > > > > - Block inter-client communication on the same interface
> > > > > - Simple Firewall
> > > > > - WEP Support for Intersil Cards in 802.11b mode
> > > > > - IAPP
> > > > > - PPoE Filtering
> > > > > - TurboCell Polling update for large Networks
> > > > > - Updated Windows based configurator
> > > > > - Updated Help Files and Documentation <g>
> > > > > - value range for pings is now 64-2000 Bytes (as opposed
> to the 1472
> > > > Byte
> > > > > limit)
> > > > >
> > > > >
> > > > > Corrected issues in 4.27
> > > > >
> > > > > - RIP-2 in kernel 4.13 use triggered updates to send empty default
> > > route
> > > > > - Station list is being corrupted re:RADIUS re-Auth
> > > > > - Permission denied problem for read only kernel and temp bin file
> > > not
> > > > > removed
> > > > > - Default Bandwidth throttling is not working correctly in kernel
> > > 4.02
> > > > > - Garbage collection is not working
> > > > > - RIP2 default gateway is not sent after learned by device
> > > > > - After initial upload of SEC only builds, AP option in the
> > > interface is
> > > > not
> > > > > dimmed
> > > > > - Base can not do Radius Authentication for Satellite
> when the other
> > > > > wireless interface is configuring in AP mode
> > > > > - Kernel 4.00 doesn't load on a WP-II
> > > > > - MIB-II Routing table is not updated
> > > > > - Outdoor Router does use 'preferred IP address' as source address
> > > for
> > > > ICMP
> > > > > 'TTL expired in transit' message
> > > > > - Firewall option fails to function correctly with VPN / IPSEC
> > > through
> > > > the
> > > > > RG
> > > > > - Incoming NAT using wildcard port blocks Outgoing NAT for other
> > > clients
> > > > > - DHCP Client of AP-1000 is renewing the IP addresses to soon
> > > > >
> > > > > Features for next release
> > > > > - VLAN Support
> > > > > - Continued Improvement of Documentation
> > > > > - TurboCell Autoroam Feature
> > > > >
> > > > > _______________________________________________
> > > > > Karlnet mailing list
> > > > > Karlnet@WISPNotes.com
> > > > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > > > >
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Karlnet mailing list
> > > > Karlnet@WISPNotes.com
> > > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > > > ---
> > > > [This E-mail scanned for viruses by Declude Virus]
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
Inhibit NAT Summary.doc
Description: MS-Word document
|