RE: [Karlnet] PRISM II 100mW card and Karlnet TC V4.02

["Support" <support@karlnet.com>]

Norm,

 

We see this problem with some of the higher power radios in the AP-1000 and the RG-1000.  Those pieces of hardware were made for the 32mW radios and they will act funny with the 100mW and 200mW radios coming out. I have not seen the radio you are using, but if you want to send one in for testing we'd be glad to look at it for you.

 

Doug

The second, much more serious problem is that after changing the params in the AP-1000 remotely, and telling it to reboot, it hung and required a long trip up the mountain to reboot it by power cycling.   (I wasn't a happy camper.)   This AP-1000 is running Karlnet TC v4.02, and has both interfaces running TC, one, the Orinoco card as a satellite for the backhaul, and the other, the PRISM II 100mW card running as an ISP Base as the PtMP.   I tried rebooting it from the configurator several times, and about half the time it would hang on reboot and necessitate a power cycle.

 

Anyone seeing these, or similar problems?

 

Norm