Thanks guys! Many responses received!
What I ended up doing was to download
DOS CT10, latest version and installed same
in a new directory. All works well now.
73...and thanks again!
Charlie, N0TT
>
> On Thu, Nov 5, 2009 at 8:59 AM, Missouri Guy <n0tt1@juno.com>
> wrote:
>
> > Hi Gents,
> >
> > I'm trying to let CT V9.x communicate with my Electraft K3 radio
> > when I want to change bands, either by changing the band
> > with the radio or with the computer ( {ALT}F1 or F2).
> >
> > I'm using a my trusty DOS notebook computer, a Gateway
> > Colorbook. COMTSR1 is running and specified to
> > communicate at 4800 baud. No port conflicts that I know about.
> > The radio1 selected in the CT setup is TS-50.
> > The PORT setup in CT is: COM1 4800 RADIO1
> >
> > I'm using a standard RS-232 cord between the radio's RS232 port
> > and the COM port on my computer. Wrong cord?
> >
> > Is there something else I should change or setup?
> >
> > Thanks,
> > Charlie, N0TT
> > _______________________________________________
> > CT-User mailing list
> > CT-User@contesting.com
> > http://lists.contesting.com/mailman/listinfo/ct-user
> > CT on the web: http://www.k1ea.com/
> >
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web: http://www.k1ea.com/
>
>
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|