Did you set the baud rate in one of the K3 Menus
If that don't work, download lates ver 10 and K3 is in list pf rigs
Works fine on my K3 with CT ver 10
73, Dennis n6KI
On Thu, Nov 5, 2009 at 8:59 AM, Missouri Guy <n0tt1@juno.com> wrote:
> Hi Gents,
>
> I'm trying to let CT V9.x communicate with my Electraft K3 radio
> when I want to change bands, either by changing the band
> with the radio or with the computer ( {ALT}F1 or F2).
>
> I'm using a my trusty DOS notebook computer, a Gateway
> Colorbook. COMTSR1 is running and specified to
> communicate at 4800 baud. No port conflicts that I know about.
> The radio1 selected in the CT setup is TS-50.
> The PORT setup in CT is: COM1 4800 RADIO1
>
> I'm using a standard RS-232 cord between the radio's RS232 port
> and the COM port on my computer. Wrong cord?
>
> Is there something else I should change or setup?
>
> Thanks,
> Charlie, N0TT
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web: http://www.k1ea.com/
>
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|