--- On Wed, 2/18/09, Karl Brandt <nd8dx@yahoo.com> wrote:
From: Karl Brandt <nd8dx@yahoo.com>
Subject: RE: [ct-user] K1EA/Harvard Radio DVP pinout help pse
To: "Ted Bryant" <W4NZ@comcast.net>
Date: Wednesday, February 18, 2009, 8:21 PM
Hi Ted,
Thank You for the PDF of the manual. The only thing confusing abt the cable is
the lack of nomenclature such as the usual "input"/ "output"...I wud assume tt
the "mic jack" ( to pin 3) wud be the input and the "mic plug" ( to pin 1) wud
be the output....however the used cable I recieved is marked "mic" on the pair
tt goes to pin 1 ...completely opposite of what
I wud expect based on the use of the terms plug and jack in the drawings. Hope
tt makes sense...so now the question is which is right... is the mic input to
the DVP pin 1 or
pin 3 ??
73's TU Karl
--- On Tue, 2/17/09, Ted Bryant <W4NZ@comcast.net> wrote:
From: Ted Bryant <W4NZ@comcast.net>
Subject: RE: [ct-user] K1EA/Harvard Radio DVP pinout help pse
To: nd8dx@yahoo.com
Date: Tuesday, February 17, 2009, 11:23 PM
Karl,
See attached. Hope this helps.
73, Ted W4NZ
-----Original Message-----
From: ct-user-bounces@contesting.com
[mailto:ct-user-bounces@contesting.com]On Behalf Of Karl Brandt
Sent: Wednesday, February 18, 2009 5:02 AM
To: ct-user@contesting.com; Dennis V
Subject: [ct-user] K1EA/Harvard Radio DVP pinout help pse
Hi,
I recently picked up a DVP card (rev. C)and an unterminated cable, sadly no
manual. Was wondering if someone can pse tell me which pins on the DB15 are
mic line/ptt output to the rig.
73's TIA Karl ND8DX
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|