Jim,
Thanks much. You nailed it! The CIV transceive was indeed off. CT picks up
the mode and band changes fine now.
John DeRuiter, WM7A
98 TJ http://groups.msn.com/JDsPage/jdspage.msnw
----- Original Message -----
From: "Jim Reisert AD1C" <jjreisert@alum.mit.edu>
To: "John DeRuiter" <wm7a@msn.com>; <ct-user@contesting.com>
Sent: Friday, September 05, 2003 4:54 AM
Subject: Re: [ct-user] CT Radio Interfaces
> At 10:24 PM 9/4/2003, John DeRuiter wrote:
>
> >I am a new user of CT and am having some problems.
> >
> >1.) I can control the frequency of my ICOM 756 from CT, but CT does not
> >automatically sense the band the radio is on. It appears that it does
not
> >poll the 756 to get the freq/band info. Is there some way that I can fix
> >this?
>
> Go into your settings on your '756. Make sure CT-17 Transceive is set to
> ON. This allows the radio to babble its frequency when you spin the dial.
>
> 73 - Jim AD1C
>
>
> --
> Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
> USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
> PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC
>
>
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|