Robert,
I don't believe that it is possible to have two DVP's in one computer,but
aside from that, there's no real reason to be able to do that since you can
only transmit on one radio at a time.
Your external switching apparatus should move the output of the DVP to the
appropriate radio driven by the radio a/b bit on the LPT port.
In other words, you should connect the output of the DVP to the input of
your switching system - just like your microphone should be.
CT will then direct it to the proper radio.
Bob N5NJ
----- Original Message -----
From: "Robert Wood" <rwood90@houston.rr.com>
To: <ct-user@contesting.com>
Sent: Tuesday, January 01, 2002 1:36 PM
Subject: [ct-user] SO2R
> Is it possible to use CT with TWO dvp's in the DOS machine - one for each
> radio ???
>
> 73 Robert W5AJ
>
> PS: Seriously!
>
> _______________________________________________
> ct-user mailing list
> ct-user@contesting.com
> ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user
|