There is a new CT936 beta in http://www.contesting.com/ctvault/
* CT now supports point and shoot for the band map:
Use ALT RIGHT ARROW to enter the band map. Select a spot with the UP
ARROW or
DOWN ARROW, then press <Enter>. This is similar to the Announce Window
point and shoot. When you are done, ALT F4 transfers you back to your
run frequency as usual. You may also select a QSO from the band map
and press the DEL key to delete it.
* Alt F4 has changed a bit. After you have a selected a spot through either
the Announce Window point and shoot, or the Band Map Window point and shoot,
ALT F4 will toggle between your run frequency and the selected spot.
ALT F4 used to toggle between your run frequency and last spot in
the Announce Window. Using the new scheme, you can repeatedly toggle
between your run frequency and the pileup, holding the run freq and
calling in the pileup.
* CT now supports thr FT920
* Fixed 940 bug
* Fixed networking crash
* Fixed SETDATE command (tnx K1AE)
* IARU check country is now fixed (tnx K3CT)
* Fixed crash on WRITELOG of large VHF logs (tnx K1TR)
* CT now reads and restores the CW sideband (upper or lower)
* CT now supports PTT on pin 16 of the LPT ports. Pin 16 is asserted for
one baud (dot period) before CW sending commences. This allows amplifier
relays time to trip before the RF hits.
* Fixed the "long dash problem" when using the '+' key to confirm and qrz
* This version has a re-written communbications handler for talking to radios,
packet and networking. This is prep work for the Windows release
* FT840 added, but not tested (I dont't have a radio to test with).
----- Items Reported, but not confirmed or corrected ------
Please send me e-mail if you have observed or can reproduce these problems
* Need a way to pull calls from bandmap (NA2NA)
* CT1BOH would like a the rate box to report points for last hour
* NOWORKDUPE does not surpress F4, as the manual says it should (W5UN)
* Need a scratchpad for backcopy of multiple calls in a pileup (W6NL)
* Colorsave does not work (NN5T)
* W0TM: CQWW requires a single log for M/S, not two logs, as in the paper
days (W0TM)
* K3WW: wants to send from the paddle and have weight control
* VE3SS: requests the Canada Day and Canada Winter Contests
* K3MM: would like CT track the radio mode in muti-mode contests
* KC1XX: would like the RIT cleared after each QSO is logged
* W3LPL: CQWW ARRL DX should not count zero pt qso's in the summary box
* W3LPL: recognize a valid px as soon as it's typed, then alert passing
potential
* W3LPL: config file for windows setup
* Many: support the new six band changes per hour rule in ARRL DX
Ken Wolff <kwolff@pop.ma.utlranet.com>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|