CT-User
[Top] [All Lists]

[ct-user] DVP hum with Kenwood ?

To: <ct-user@contesting.com>
Subject: [ct-user] DVP hum with Kenwood ?
From: Danilo Brelih <danilo.brelih@siol.net> (Danilo Brelih)
Date: Wed, 24 Sep 1997 17:11:02 +0200
Message-ID: <342844E1.1791@siol.net>
To: <ct-user@contesting.com>
Date: Wed, 24 Sep 1997 00:38:25 +0200
From: Danilo Brelih <danilo.brelih@siol.net>
Reply-To: danilo.brelih@siol.net
X-Mailer: Mozilla 3.01 (Win95; I)
MIME-Version: 1.0
To: ct-user@ve7tcp.ampr.org
Subject: DVP hum with Kenwood ?
Content-Type: text/plain; charset=iso-8859-2
Content-Transfer-Encoding: 7bit

Hi

Using TS950SDX with DVP (original Kenw. cable) and ProSet
headphones (HC4) by Heil.
I have really bad hum on my transmit signal using the DVP.
Some one says there is a difference between chassis ground
and microphone audio ground.?
Have I need to try lifting one of the shields/grounds.?
Which one (pin) on which end you try?
Any other ideas?

I ran lot of ground wire from the radio,computer case..
directly to ground with no luck.

Thank you fm Dan, S50U

-- 
__________________________________________________________________
Danilo Brelih                         HAM: S50U
Gorje 14A                          E-Mail: danilo.brelih@siol.net   
5282 CERKNO                              : S50U@S55TCP.AMPR.ORG 
SLOVENIA                            phone: +386 65 745 117
           URL: http://lea.hamradio.si/~s50e/s50e.html            
__________________________________________________________________


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://ve7tcp.ampr.org/Software/ct
Questions:                owner-ct-user@contesting.com

<Prev in Thread] Current Thread [Next in Thread>
  • [ct-user] DVP hum with Kenwood ?, Danilo Brelih <=