Rich,
Have done all that, but forgot one important detail. I"m using a MK2R+
which does the audio routing. Both instances load with the correct
configuration, but .. still
1) Both Digital windows decode signals from Radio 1
2) There is no PTT to Radio 2
Even more mysterious, this happens, I still have decode on Window1 even if I
turn the USB router software for the MK2R+ off. I *thought* the router
was required for any audio passthrough.
73
Steve KL7SB
On Sat, 15 Dec 2018 17:32:27 -0500, Richard Ferch wrote:
Steve,
Don't try to *install* MMTTY twice. Install it once, then create a new
folder somewhere and *copy* the mmtty.exe, mmtty.ini and userparms.ini
files into the new folder (also any extfsk files, if you use any of those).
If you want to run the second copy stand-alone, you might want to copy the
other files from the first MMTTY program folder into the second folder, and
create a second desktop shortcut, but this is not necessary if you always
run MMTTY from inside a logging program. Configure your logging software to
point to the first copy for Radio 1 and the second copy for Radio 2.
73,
Rich VE3KI
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|