Paul,
Best info is in W7EL's Notes for the two log periodic examples in EZNEC
(LogPer and LogPerTL), one with interconnecting wires, the other with
transmission lines.
Gary
K9AY
> Hi Group,
>
> Using EZ-NEC, is it reasonable to model an open wire feed line, for
> example a 600 ohm ladder line using two parallel wire segments shorted at
> each end by two other wire segments, one end being the source, the other
> being the load?
>
> I know I can add a transmission line and change the impedance, but what
> about if I'm modeling the "special" transformation properties of specific
> lengths of transmission lines?
>
> If not, how is this done?
> thanks,
> Paul (KG7HF)
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
|