Hi Again.
My AL-811H antenna relay is acting up. When it goes back to receive
sometimes it is not making contact and receive is way down. I thought I
would take the case off and clean the contacts on the relay.
To my surprise, the relays are not open frame where you can get at them.
So - I guess the only solution would be to pull the board and unsolder the
relays?? Not looking forward to having to do that 73
Tom W7WHY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|