Amps
[Top] [All Lists]

Re: [Amps] anyone build an amplifier use 6T51 glass buble?

To: Amps <amps@contesting.com>
Subject: Re: [Amps] anyone build an amplifier use 6T51 glass buble?
From: Yueh Hsu <hsu4qro@gmail.com>
Date: Mon, 13 Jan 2020 05:48:03 +0800
List-post: <mailto:amps@contesting.com>
ps, the plate dissapation is 800W, but it is run in  continuously business
service,if run in intermittently business service, the plate diss is 1500W(
only for ceramic-metal version)
   Hsu


Yueh Hsu <hsu4qro@gmail.com> 于2020年1月13日周一 上午5:31写道:

>
> https://detail.tmall.com/item.htm?spm=a230r.1.14.8.72c653fbR8xhRf&id=606357822679&cm_id=140105335569ed55e27b&abbucket=16
>
> https://detail.tmall.com/item.htm?spm=a230r.1.14.1.72c653fbR8xhRf&id=606230613322&cm_id=140105335569ed55e27b&abbucket=16
> the links are distributers. not manufacturer 6T51 have two version,glass
> and ceramic-metal. same specs.
> glass version is cheaper.
>    I'm sure it contact manufacturer, the price should lower,mayb less $100.
>             Hsu
>
> Yueh Hsu <hsu4qro@gmail.com> 于2020年1月12日周日 上午10:28写道:
>
>>  The datasheet here http://www.boezk.com/download_en/FU6051_EN.pdf, its
>> mu=48,not too bad. it is a cheap tube . the manufacturer's list price only
>> $100+....
>>            Hsu
>>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>