I have two Eimac 4CX1500B never been in a socket and I had intentions
of building a linear, but the desire is gone, I also have a Peter Dahl
transformer which I was using for my power supply which was about 90%
completed and tested using 115vac to the primary.
Initially I had 4, 4CX1500B tubes and sold two which are on the air. I
have a number of other items that I will be listing soon.
I have a new Dayton blower never used model 1TDP1, 50/60 cycles, 89cfm
free air at 60hz. still in the Dayton box.
If interested reply to my above email adr.
73, Pete, N4KW
On 6/14/2019 12:20 PM, Edward stallman wrote:
I bought a NOS Eimac 4CX1000a . Looking at the tube, ir shows no signs
it has been used. Is their a place I can send the tube to have it
Gettered and tested before installing in my Acom 2100 amp ?
Tnx Ed N5DG
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|