With an anode current of 2A at 1KV the output impedance will be around 250
ohms.
73
Peter
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of
donroden@hiwaay.net
Sent: Dienstag, 20. Januar 2015 11:50
To: Fuqua, Bill L
Cc: amps@contesting.com
Subject: Re: [Amps] Multi-tube vs Single or Dual-tube amps?
IF I recall correctly, the WRL2000 plate impedance was 1000v/2amps
or 50 ohms.
Don W4DNR
Quoting "Fuqua, Bill L" <wlfuqu00@uky.edu>:
> I bet you have a much better chance of getting two matching 4-125A
> tubes than 10 sweep tubes.
> Hi Hi Hi
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|