Amps
[Top] [All Lists]

Re: [Amps] premade HV rectifier board

To: 'Dave Hachadorian' <k6ll.dave@gmail.com>, amps@contesting.com
Subject: Re: [Amps] premade HV rectifier board
From: Rejean Leveille <releveille@videotron.ca>
Date: Sat, 06 Jul 2013 21:52:38 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi Dave

With 240v ac line input we get +3600 HV that means we already reached 450v
for 450v capacitor. Seen nothing is perfect if you measured each capacitor
some will show +455v and in the event there was a line voltage spike there
is a chance to blew them up. When I received my Al-1500 I installed some
500v to be on the safe side and cheaper than to buy a new board again
working on the edge.

Also the wiring is under size for the HV input transformer circuit and I
doubled the wiring circuit. Now the HV voltage drop is 200v instead of 600v
at 2kw. I did many mod to meet heavy duty usage 160-10m and safety taken
from commercial service engineer. Original specs are taken from the Eimac
tube what it could do and this Amplifier reached its limit at 1.5kw. I like
to have more head room, stable IMD and this is possible.

73, Réjean va2am

-----Message d'origine-----
De : Amps [mailto:amps-bounces@contesting.com] De la part de Dave
Hachadorian
Envoyé : July 4, 2013 6:25 PM
À : amps@contesting.com
Objet : Re: [Amps] premade HV rectifier board

A friend of mine blew one of the filter capacitors in his AL-1500.  As I
remember, the entire filter capacitor board, with capacitors and resistors
installed, was very reasonably priced. 
($180?)  I suspect that their Rectifier Board is also reasonable. 
The techs at Ameritron are very friendly, knowledgeable, and a pleasure to
deal with.

The AL-1500 manual, with schematic, is here:
http://www.qsl.net/4/4x6on/RADIO%20MANUALS/AMERITRON/AMERITRON--AL-1500-User
-Manual.pdf


Dave Hachadorian, K6LL
Big Bear Lake, CA


-----Original Message-----
From: Stein-Roar Brobakken[LA6FJA]
Sent: Thursday, July 04, 2013 5:31 AM
To: amps@contesting.com
Subject: [Amps] premade HV rectifier board


Hi

Does anyone know a place to buy premade HV rectifier board etc 
for HF
amplifier?

73s LA6FJA Rag





_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>