Amps
[Top] [All Lists]

Re: [Amps] Coils for vacuum relays

To: "kingwood" <k5jv@kingwoodcable.com>, "Amp Reflector" <amps@contesting.com>, "CCA Reflector" <collins@listserve.com>, "collins reflector" <collins@mailman.qth.net>
Subject: Re: [Amps] Coils for vacuum relays
From: "VE6WZ_Steve" <ve6wz@shaw.ca>
Date: Fri, 1 Mar 2013 09:34:56 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
http://www.mgs4u.com/RF-Microwave/vacuum-relays-SPDT.htm

scroll to bottom.

--------------------------------------------------
From: "kingwood" <k5jv@kingwoodcable.com>
Sent: Thursday, February 28, 2013 6:53 PM
To: "Amp Reflector" <amps@contesting.com>; "CCA Reflector" <collins@listserve.com>; "collins reflector" <collins@mailman.qth.net>
Subject: [Amps] Coils for vacuum relays

Greetings to all,

I am looking for a few 24 volt coils for Jennings/Kilovac, RJ-1/HC-1/2, vacuum relays. I have been unable to locate a source that will sell just the coils. They all want to sell a complete relay.

I have about 50, of what I call "Large", coils, just under 1 inch in diameter (Jennings number 220110 24 V) and about 50, of what I call "Medium", coils, approximately 1/2 inch in diameter (Jennings number 201660 26.5 V). These coils are new, old stock, from Peter Dahl's estate. Peter sold his Jennings inventory before I got involved in his liquidation. I found these coils when I cleaned out his stock.

I will be glad to trade, or sell, these coils. As I said above, I need several "Small", 24 V, coils for the RJ-1/HC-1/2, vacuum relays. Will sell the "Large coils", in single units for $25.00, and "Small coils, for $15, including shipping to the original 48.
73 de Lon, K5JV

Lon W. Cottingham

1110 Golden Bear Ln.
Kingwood, TX 77339

281-358-4207
281-795-1335 Cell
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>