I have an old Jennings vacuum variable catalog but it lists only the
peak test voltage. For a type U it can be anywhere from 3 to 60KV.
There should be a number following the capacitance number that will give
the voltage rating as in UCSL 500 - 5S; 500 pF and 5KV peak test rating.
David
KW4DH
On 11/13/2011 12:51 PM, Fuqua, Bill L wrote:
> Sorry, I should have said the voltage rating.
>
> ________________________________________
> From: Fuqua, Bill L
> Sent: Sunday, November 13, 2011 12:48 PM
> To: amps@contesting.com
> Subject: Need spec for Jennins type U
>
> I need the break down voltage rateing for a Jennings type U capacitor.
> I used to have a list of all sorts of vacuum variables but it is on a long
> gone
> computer.
>
> 73
> Bill wa4lav
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--
"There are two means of refuge from the miseries of life. Music and cats." ~
Albert Schweitzer ~
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|