Greetings
I am trying to install a Ameritron 811 amp to a FT-950 radio. I have a
Ameritron ARB-704 interface and a Ameritron PHP-8M cable. If I am reading
correctly, I connect the interface, using the supplied cable, to the radio and
make no other connections. The interface on the radio side connects at the
"linear" port on the radio and the "multi-port" on the interface. The RCA plugs
are not used.
I have read in too many places with different suggestions/instructions and am
now confused. I seem to recall I spoke with a vendor at Dayton last year and
was instructed not to use the "linear" port on the radio and use the "tuner"
instead. I don't know about this as logic tells me this is a bad idea.
What do the experts say?
Thanks and 73
Dave de W9COP
--
I am using the free version of SPAMfighter.
We are a community of 7 million users fighting spam.
SPAMfighter has removed 1801 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|