I would yield to the amp gurus - but I suspect the 10 to 25 ohm surge
resistor between the filter cap bank and the tube will do more to protect
the tube than any fuses .
Hank K7HP
----- Original Message -----
From: "Dave Cole" <dave@nk7z.net>
To: <amps@contesting.com>
Sent: Tuesday, March 01, 2011 7:20 PM
Subject: Re: [Amps] Al-82 Blowing fuses?
> Hi,
>
> That thought occurred to me... I had two, then went to a slow blow, ad
> none, then decided a 20 A Fast Blow, would be better than a 15 Amp
> slow blow. That is what I was asking about...
>
> Dave
> NK7Z
>
>
> ====================CUT==================
> On Tue, 01 Mar 2011 00:41:36 +0000
> Ron Youvan <ka4inm@tampabay.rr.com> wrote:
>
>> Dave NK7Z Cole wrote:
>>
>> > I am using 20 Amp fast blow... The theory is that it might save a
>> > tube, as opposed to the slow blow fuses... Any thoughts from
>> > anyone?
>>
>> If you have a lot of false blows re-think your strategy.
>
> ==================END CUT================
>
> --
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|