Amps
[Top] [All Lists]

Re: [Amps] Ten Tec Centurion

To: <dezrat1242@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] Ten Tec Centurion
From: "Gary Smith" <wa6fgi@sbcglobal.net>
Date: Sun, 10 Jan 2010 12:51:45 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Many thanks to all who responded to my question regarding the TT Centurion.

As of this date, seller and I are in discussion regarding the correct packing 
of the amp for coast-to-coast shipment.

Will keep all posted as to how everything works out, I am looking forward to 
owning a twin 3-500 z amp.

73,
Gary...wa6fgi




----- Original Message ----- 
  From: Bill, W6WRT 
  To: amps@contesting.com 
  Sent: Saturday, January 09, 2010 6:06 PM
  Subject: Re: [Amps] Ten Tec Centurion


  ORIGINAL MESSAGE:

  On Sat, 9 Jan 2010 19:07:20 -0600, Rob Atkinson <ranchorobbo@gmail.com> wrote:

  >I used a CRL doorknob because I had it on
  >hand.  You could use a high voltage disk ceramic too for less $$$ I
  >guess.

  REPLY:

  If you use a disk ceramic, try to find a NP0 type. Any other type will drift 
as
  it heats up from the circulating tank current. Not a major deal, but a 
nuisance
  to be avoided if possible.

  73, Bill W6WRT
  _______________________________________________
  Amps mailing list
  Amps@contesting.com
  http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>