Thanks for the replies and bias idea.
73
Tom
WB3JHP
> From: mikflathead@aol.com
> Subject: [Amps] am-6154 cavities
> You could share the power supply and just swap cavities when you want to
> change bands. You would need to switch the inputs and outputs. Mike
--------------------------------------------------------------------------------->>
Message: 3> From: jmltinc@aol.com> Subject: Re: [Amps] switching cavaties in
the AM-6155 Amp> Tom, I don't switch cavities, but I replaced the Stand-by
toggle switchwith a 'Center-off' toggle to switch between two bias voltages. A
separateboard behind the front panel containes the zeners and resistors.>>
-John, N9RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|