Amps
[Top] [All Lists]

[Amps] Measuring meter pointer deflection

To: amps@contesting.com
Subject: [Amps] Measuring meter pointer deflection
From: Paul Kelley N1BUG <paul.kelley.n1bug@gmail.com>
Date: Mon, 16 Mar 2009 09:09:10 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I hope this is an appropriate question for the Amps list.

I'm trying to design custom meter scales for my amplifiers. I 
downloaded the Meter program from Tonne Software which seems to work 
great. The only problem is I'm having trouble trying to accurately 
measure the pointer deflection on my meters. The smaller meters are 
especially challenging. Various meters I'm using seem to have 
deflections all over the place in the 90 to 110 degree range, but my 
measurements are rarely any better than plus or minus 3 or 4 degrees 
of the correct value. I am finding I need to print out several 
versions of a meter scale using assorted values for pointer 
deflection clustered around my "measured" value, try them all in the 
meter and pick the one that is correct. Trying them all in the meter 
is tedious since it involves trimming and punching holes in each one.

I know many members of this group use this program. How do you 
measure pointer deflection on a meter? Am I the only one who is 
pointer deflection measurement challenged? I may be using the wrong 
tools, but I obviously don't know what the right tool for the job is!

73,
Paul N1BUG
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>