Stephen Atkins skrev:
> Hello everyone. I heard this is the place to go for answers on
> amplifiers. I've been able to put my hands on an old FLdx2000 Yaesu
> amplifier. Reading through the documentation it says it uses an untuned
> input. Which from everything I've read, modern transceivers don't like.
> While searching around on how to maybe build a tuned input for it I
> came across LDG's site which has an AT-100AMP. Its no longer in
> production but its basically an AT-100Pro autotuner without the LEDs and
> buttons. The docs for the 100AMP says it was made for use on home brew
> amplifiers that don't have a tuned input or need a tuned input. Can
> someone confirm that using my AT-100pro auto tuner will give me the
> desired results with this amplifier?
>
> Thank you.
>
It's not that it doesn't have tuned input - it's just not good enough
for a modern transitorised transceiver!
If you look here: http://www.frenning.dk/OZ1PIF_HOMEPAGE/FL2000-QB.htm
you'll find a description of a project that involves building a better
input tuning circuit for it..
--
Vy 73 de OZ1PIF/5Q2M, Peter
** CW: Who? Me? You must be joking!! **
email: peter(no-spam-filler)@frenning.dk
http://www.frenning.dk/oz1pif.htm
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|