Amps
[Top] [All Lists]

Re: [Amps] SB220 "A" mods

To: <amps@contesting.com>
Subject: Re: [Amps] SB220 "A" mods
From: "Steve Flood" <kk7uv@bresnan.net>
Reply-to: Steve Flood <kk7uv@bresnan.net>
Date: Fri, 28 Mar 2008 10:35:45 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I've often wondered about the "MODE" switch?   It selects the appropriate 
winding tap on the primary for higher voltage SSB or lower voltage CW.
As you switch from one mode to the other, there is a temporary open circuit 
on the primary as the switch cotactor swings from pole to pole.  Has this 
ever been a problem?

Steve KK7UV 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>