[Amps] IC-746Pro Timing between SEND output and RF

Amps

[Amps] IC-746Pro Timing between SEND output and RF

To:	amps <amps@contesting.com>
Subject:	[Amps] IC-746Pro Timing between SEND output and RF
From:	jeff millar <wa1hco@adelphia.net>
Date:	Sun, 22 May 2005 15:03:12 -0400
List-post:	<mailto:amps@contesting.com>

To followup on a previous question about the timing between the Send 
signal on the back and RF output...

After a bit of measuring in SSB, FM and CW breakin, the RF starts 10 
msec after Send goes low and ends 10 msec before Send goes high.

jeff, wa1hco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] IC-746Pro Timing between SEND output and RF, jeff millar <=

Previous by Date:	Re: [Amps] RENEGADE CUSTOM 300B, Will Matney
Next by Date:	Re: [Amps] FW: pi to pi-L o/p matching question, John Irwin
Previous by Thread:	[Amps] RENEGADE CUSTOM 300B, JAMES SMITH
Next by Thread:	[Amps] 3cx3000a7 choke, Joe Francalanza
Indexes:	[Date] [Thread] [Top] [All Lists]