Re: [Amps] Unknown tube amp

["Dr. William J. Schmidt, II" <bill@wjschmidt.com>]

A picture would go a long way here....

Sincerely,

Dr. William J. Schmidt, II  K9HZ
Trustee of the North American QRO - Central Division Club - K9ZC

"Collector of Edison Wind-up Phonographs... Do you have one for me?"
Email: bill@wjschmidt.com
Alternate Email: wmschmidt@charter.net
WebPage: www.wjschmidt.com



----- Original Message ----- 
From: "Vic Rosenthal" <vic@rakefet.com>
To: "jeff millar" <wa1hco@adelphia.net>
Cc: <amps@contesting.com>
Sent: Sunday, December 12, 2004 11:00 AM
Subject: Re: [Amps] Unknown tube amp


> jeff millar wrote:
>
> > 833s don't twist and both plate and grid lie on top.
>
> The 833A has two big filament pins at the bottom, which can be held by a 
> twist-in arrangement, sort of like the way the pins on a fluorescent tube 
> are held.  And the original writer said "two plate-cap type connectors", 
> which I understand to be the plate and grid connections of the 833A.  He 
> didn't mention any other connections, so unless these are diodes, I assume 
> that one is the grid.  Also the physical size is right, and a pair of 
> 833A's would be comfortable for a 1 KW input plate-modulated class-C 
> amplifier.
>
> --
> 73,
> Vic, K2VCO
> Fresno CA
> http://www.qsl.net/k2vco
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps